Transfer ACTAS Px60 and Px60+ reports directly to a phone—without Wi‑Fi, internet access, or installing software on a customer computer.
Prepare the ACTAS Link first, export the selected Job from the ACTAS, then connect with the mobile app and download the file.
Start ACTAS Link before connecting it to the ACTAS.
Plug it into the ACTAS Px60/Px60+ USB port.
Select the required Job and export its report.
Pair the phone and open or share the file.
Follow this order carefully. Starting the module before connecting it to the ACTAS helps ensure that the removable drive is detected correctly.
With the module disconnected from the ACTAS, press the power switch once and then press and hold it a second time until the LEDs turn on.
Connect the ACTAS Link USB cable to the ACTAS USB port. Keep the module powered and allow the ACTAS time to detect it as a removable drive.
From the ACTAS home screen, open Jobs. Select the Job containing the test result that you want to transfer.
Inside the selected Job, choose Export and create the required report or data file. Wait until the ACTAS confirms that the export is complete.
Enable Bluetooth on the phone and open the ACTAS Link app. The module may take up to approximately three minutes after startup to become visible.
The app scans for ACTAS Link, pairs over Bluetooth, lists the exported files, and lets the technician download or share them.
Wait for ACTAS Link to appear.
Choose the ACTAS file server.
Approve the Bluetooth prompts.
Open, save, or share the file.
The exported ACTAS report is now available on the phone and can be opened, saved to Files, or shared through another compatible application.
Most connection problems are resolved by checking the startup order, USB detection time, Bluetooth availability, and the selected Job.
Disconnect the USB cable, confirm ACTAS Link is powered, wait 1–2 minutes, reconnect it, and allow about one minute for USB detection.
Confirm Bluetooth is enabled, keep the phone close to ACTAS Link, and allow up to approximately three minutes after startup for the device to appear.
Verify that the correct Job was selected and that the report export finished successfully before opening the mobile app.